B50-15XL Competition + 6,7:1 Kv 1100

Item no.:  10100907 EAN: 4250320245629  MPN: 
B50-15XL Competition + 6,7:1 Kv 1100 - Image 1
B50-15XL Competition + 6,7:1 Kv 1100 - Image 2
B50-15XL Competition + 6,7:1 Kv 1100 - Image 3
B50-15XL Competition + 6,7:1 Kv 1100 - Image 1B50-15XL Competition + 6,7:1 Kv 1100 - Image 2B50-15XL Competition + 6,7:1 Kv 1100 - Image 3
Hacker Motor GmbH
more articles from Hacker Motor GmbH
449,90 EUR
incl. VAT and excl. shipping
Total amount: {{ totalPrice }} EUR
This item notice Article is noted
Availability: (Delivery time: )
  • Description
B50-15XL Competition with 6,7:1 Gearbox
 
area of application: large Glider 18-25kg at 12 LiPo
 
The integrated high-performance fan cools the B50 competition motors in the most effective way. The running noise is also reduced to a minimum with asymmetrically positioned air outlet holes. The outer housing design with milled cooling grooves offers perfect heat radiation with the lowest possible weight.

The B50 competition motors are equipped with segmented high-performance rotors made from optimized magnetic material.

The B50-Competition is equipped with larger ball bearings than its predecessor Hacker B50. This significantly reduces friction and optimizes service life. In addition, a stronger, internal shaft with a diameter of 6mm prevents vibrations at extreme speeds. The front and rear end shields are screwed together. The shaft is equipped with an integrated pinion. The increased power output of the B50 competition motors is guaranteed by a high-performance gearbox with a 6mm shaft.  
Specifiactions
max. power range [W] (max.15 sec.) 2700
Poles 2
Turns 15
Idle current (I0) at 8.4V [A] 1,4
Internal resistance (Ri) [Ohm] 0,028
Gear reducing 6,7:1
Recommended timing [°] 0 - 5
Switching Frequenzy [kHz] 8
Controller recommendation [A] (depending on setup) 70 - 130
Leerlaufdrehzahl pro Volt (kv) ohne Getriebe 1100
Dimensions and weight
Weight [g] 405
Length [mm]/[in] 105
Outer diameter [mm]/[in] 37
Shaft diameter [mm]/[in] 6
Delivery contents
Prop Adapter Nein
Mounting cross Nein
Gold plug mm (recommended) 4 - 5,5
Backmount mountable Nein
Front mountable Ja
Average customer rating: 
Number of Customer reviews: 0
Write an online review of this item and show it to other visitors!