- Description
- Downloads
"click" connect cover+bottom for battery mounting board 2x 2S
Product description and features
Cover and base suitable for the 2x 2S battery mounting board.
The case is 3D printed. Under Downloads you will find the 3D print files if you want to print the case yourself.
Compatibility
Suitable for LiIon single cells of the 18650 size*, see accessories.
Scope of delivery
1x lid and 1x base,
Important note: Especially when used in motor machines where stronger vibrations are possible, make sure that the LiIon batteries are mounted in a vibration-damped manner. For this purpose, the M3 vibration damper set incl. screws for LiIon battery boards (art. no. A86215) can be used (see accessories section).
Note: Soldering work should be carried out within a few seconds using a 100 watt soldering iron with a wide soldering tip.
*Note: Battery mounting boards not suitable for LiIon batteries of the 20700 size (e.g. item no. A43055).
Abmessungen | |
Länge | 17,8cm |
Breite | 4,2cm |
Höhe | 2,6cm |
Hacker Motor GmbH
Schinderstrassl 32
84030 Ergolding
Germany
info@hacker-motor.com