DPSI CUBE magnetic switch
Product description and features
The DPSI CUBE is a compact and lightweight magnetic switch suitable for 20 amps permanent current. Due to its high current rating, its low weight and its compact dimensions, the DPSI CUBE is also suitable for narrow fuselages as well as R/C cars and R/C boats.
The switch can be turned on/off from the outside of the R/C model using a magnet, so it is not necessary to drill any holes into the fuselage. 3.5 bis 12 volts input voltage. 20 amps permanent current, 30 amps permanent current for approx. 30 seconds, 40 amps peak current. Waterproof housing
The DPSI CUBE is available with 7in (AWG16) receiver and battery connection cables.
1 DPSI CUBE magnetic switch, 1 magnet with lanyard and 1 quick reference guide.
Find a detailed documentation of the DPSI CUBE in the Hacker Motor Wiki.
Notice: The switching off process of DPSI works with a hall effect sensor. Hall effect sensors can be influenced by magnet fields. It is possible that the DPSI switches off when exposed to a very strong magent field (i.g. electric drive). Current-carrying cables generate a magnet field. So please run all cables which are carrying a high current (>100A) with a distance of at least 3cm (1.18in) from the DPSI.
|Nominal input voltage||3,5V ... 12V|
|Quiescent current (switched off)||ca. 6µA|
|Quiescent current (switched on)||ca. 12mA|
|Zulässiger Temperaturbereich||-20°C ... +70°C|
|Dimensions||20,55mm x 20,55mm x 12,70mm|
|Max. permanent current||20A|
|Max. peak current||40A|
|Drop-Out-Verluste @ 7A||ca. 8mV|