- Description
- Links
- Documents
- Video
DPSI Micro SingleBat 5.9V/7.2V JR magnetic switch
Product description and features
Compact LiPo regulator with magnet switch transmitter and selectable output voltage. Suitable for 5/6cell NiCad/NiMH as well as LiIon/LiPo and LiFePo4 batteries. Regulated and stabilized output voltage 5.9 volts or 7.2 volts adjustable.
Electronically On/Off-switch for complete contact less switching operation with an external magnet from outside.
The used battery type and the low voltage detection can be programmed. Intelligent voltage monitoring with optical error indication.
Designed for 5 up to a max. of 10 servos. Supports 4A continuous current and 25A peak current. For small engine models up to approx. 2 meters wingspan, glider planes up to approx. 3 meters wing span, impeller jets or helicopters.
Connectors
- Battery connector cable JR/Uni with flexible silicone strand 0.5 mm²/AWG21 cross section.
- Integrated charging cable JR/Uni.
- Dual JR/Uni connectors with high grade silicone strand 0.5 mm²/AWG21 cross section on output side.
- All connectors are gold plated (FCI contacts).
Delivery contents
1 Magnetic switch DPSI Micro SingleBat, 1 switching magnet with EMCOTEC label, 1 vibration insulator, 2 washers, 2 screws, 1 drilling template and 1 quick reference guide.
Documentation
See a detailed documentation of the DPSI Micro SingleBat in the Hacker Motor Wiki.
Notice: The switching off process of DPSI works with a hall effect sensor. Hall effect sensors can be influenced by magnet fields. It is possible that the DPSI switches off when exposed to a very strong magent field (i.g. electric drive). Current-carrying cables generate a magnet field. So please run all cables which are carrying a high current (>100A) with a distance of at least 3cm (1.18in) from the DPSI.
| Specifications | |
| Power sources | 5 bis 7-zellige NiCd / NiMH-Akkus, 2-zellige LiIon, LiPo, LiFePO4-Akkus |
| Operating voltage range | 4,8V bis 12V |
| Nominal input voltage | 6,0V bis 8,4V |
| Output voltage | 5,9V oder 7,2V per Schiebeschalter einstellbar |
| Quiescent current (switched off) | <1µA pro Akku |
| Quiescent current (switched on) | ca. 90mA gesamt (LED Ein) |
| Max. permanent current @ 5.9V | 4A |
| Max. peak current @ 5.9V | 10A |
| Maximale Verlustleistung (Dauer) | 8W |
| Umgebungsbedingungen | -10°C bis +50°C |
| Zulässiger Temperaturbereich | -25°C bis +85°C (Lagerung) |
| CE-Prüfung | gemäß 2004/108/EC |
| Max.peak current (20ms) | 25A |
| Drop-Out-Verluste @ 2A | 0,1V |
| Dimensions | 73,4mm x 19,4mm x 14,1mm |
| Weight | 33g |
| Application scope | |
| Anzahl Servos | 5 leistungsstarke Servos, bis 10 Servos im unteren Leistungsbereich. |
| Eignung | Kleine Motormodelle bis ca. 2 Meter Spannweite, Segler bis ca. 3 Meter Spannweite, Impeller-Jets, Hubschrauber. |
Hacker Motor GmbH
Schinderstrassl 32
84030 Ergolding
Germany
info@hacker-motor.com
