Q80-11 PSD electric motor
Product description and features
The hacker R & D team around the developer Martin Vilsmeier has once again achieved a big hit with this new Q80-11 PSD!
Especially for the new requirements in the F3A aerobatics this Q80-11 PSD was developed in close cooperation with our team pilots.
The "P" stands for "Performance" by an uncompromising revision has succeeded in further improving the weight-performance ratio. The overall length has shrunk to the size of the Q80-XS.
Also the internal resistance has been reduced again which makes the whole drive more efficient and increases the possible power throughput.
Like every Q80 also this Q80-11 PSD is built, tested and measured by hand in-house.
Quality "Made in Germany" for the highest demands.
Specifications
| Power range |
max. 3200W (15 sec.) |
| Idle Current @ 8.4V |
1.1A |
| Resistance (Ri) |
0.02 Ohm |
| RPM/Volt (kv) |
205 U/min-1 |
| Weight |
620g |
| Outer diameter |
88.5mm |
| Length |
65.5mm |
| Number of poles |
28 |
| Controller recommondation |
MasterSpin 99 Opto |
| Timing recommondation |
25° |
| Switching frequency |
8kHz |
Typical setups
| Prop |
Xoar CFK 21x13 |
Mejzlik 20x14EL 3Bl. |
Falcon 20x13,5 3Bl. |
| V / LiPo |
37V = 10S LiPo |
37V = 10S LiPo |
37V = 10S LiPo |
| Amp. |
74A |
89A |
84A |
| Power |
2738W |
3293W |
3108W |
| RPM |
6150 |
5910 |
6030 |
| Controller |
Master Spin 99-Opto |
Master Spin 99-Opto |
Master Spin 99-Opto |
| Timing |
25° |
25° |
25° |
