Q80-11 PSD Senstrol electric motor
Product description and features
The hacker R & D team around the developer Martin Vilsmeier has once again achieved a big hit with this new Q80-11 PSD Senstrol!
An uncompromising revision has succeeded in further improving the weight-performance ratio. The overall length has shrunk to the size of the Q80-XS. The most important reason why the available power is significantly higher than the normal Q80, especially with this engine, is the unique Senstrol technology. Not only the motor and controller are 100% matched, but the motor is driven by a real sine wave. By this control the motor can be operated with more power and has a higher efficiency at the same time with less power loss and heat generation. Compared to the standard Q80-11 the new Q80-11 PSD Senstrol comes with up to 25% more power!
Like every Q80 also this Q80-11 PSD Senstrol is built, tested and measured by hand in-house.
Quality "Made in Germany" for the highest demands.
|Power range||max. 3400W (15 sec.)|
|Idle Current @ 8.4V||1.1A|
|Resistance (Ri)||0.02 Ohm|
|RPM/Volt (kv)||205 U/min-1|
|Number of poles||28|
|Controller recommondation||Master Senstrol 120A Opto|
|Prop||Xoar CFK 21x13||Mejzlik 20x14EL 3Bl.||Falcon 20x13,5 3Bl.|
|V / LiPo||37V = 10S LiPo||37V = 10S LiPo||37V = 10S LiPo|
|Controller||Master Senstrol 120A Opto||Master Senstrol 120A Opto||Master Senstrol 120A Opto|