The hacker R & D team around the developer Martin Vilsmeier has once again achieved a big hit with this new Q80-11 PSD!
Especially for the new requirements in the F3A aerobatics this Q80-11 PSD was developed in close cooperation with our team pilots.
The "P" stands for "Performance" by an uncompromising revision has succeeded in further improving the weight-performance ratio. The overall length has shrunk to the size of the Q80-XS.
Also the internal resistance has been reduced again which makes the whole drive more efficient and increases the possible power throughput.
Like every Q80 also this Q80-11 PSD is built, tested and measured by hand in-house.
Quality "Made in Germany" for the highest demands.
|Power range||max. 3200W (15 sec.)|
|Idle Current @ 8.4V||1.1A|
|Resistance (Ri)||0.02 Ohm|
|RPM/Volt (kv)||205 U/min-1|
|Number of poles||28|
|Controller recommondation||MasterSpin 99 Opto|
|Prop||Xoar CFK 21x13||Mejzlik 20x14EL 3Bl.||Falcon 20x13,5 3Bl.|
|V / LiPo||37V = 10S LiPo||37V = 10S LiPo||37V = 10S LiPo|
|Controller||Master Spin 99-Opto||Master Spin 99-Opto||Master Spin 99-Opto|