C50-10 L 6.7: 1 Glider Competition
Product description and features
The high-end glider drive made in Germany! Easily and efficiently with the proven cooling system from the F3A competition area.
With a special 6mm output shaft for sail models to accommodate the usual spinner / center piece combinations. It is attached to the motor bulkhead using 4x M3 with a 30mm lock circle.
Technical data:
- Power range max. 2200W (typical sailor switch-on times)
- No-load current at 8.4V 2.93A
- Internal resistance 0.0084 Ohm
- Idle speed per volt 2430 rpm
- Weight 423g
- Outside diameter 43.2 mm
- Length 91 mm
- Controller recommendation MasterSpin 99
- Recom. Timing 0 ° - 5 °
- Gear reduction ratio 6.7: 1
- Shaft diameter 6 mm (length 22mm)
Measured values??
Propeller |
Battery |
Voltage [V] |
Current [A] |
Speed ??[RPM] |
Power [W] |
RFM 18,5x12 |
5S |
18,5 |
77 |
5925 |
1425 |
RFM 17x13 |
6S |
22 |
86 |
7104 |
1892 |
Scope of delivery:
1 C50-10 L 6.7: 1 Glider Competition motor / gear unit, 1 special gear grease and manual