- Description
Chaservo HV150
Product description and features
The Chaservo HV150 series has a holding force of 30 kg and an operating torque of 24 kg. Thanks to its slim design and low weight, this high-voltage servo is able to replace numerous standard servos.
Application suggestion
HV servo for model aircraft, helicopters and RC cars.
Properties
- Nominal voltage DC 7.4V
- Voltage range DC 4.8 - 8.4V
- Output Torque
- 15 kg·cm @ 6.0V
- 18 kg·cm @ 7.4V
- 20 kg·cm @ 8.4V
- Holding Torque
- 25 kg·cm @ 6.0V
- 30 kg·cm @ 7.4V
- 33 kg·cm @ 8.4V
- Idle speed
- 0.12sec/60° @ 6.0V
- 0.10sec/60° @ 7.4V
- 0.09sec/60° @ 8.4V
- Standard angle ±100° = 200°
- Operating frequency 1520µs/333Hz
- Housing material Aluminium
- Motor type 4 pole brushless DC
- Metal gearbox
- Position sensors Potentiometer
- Programmable Yes
- 2 ball bearings
- Dimensions 35.5 x 15 x 35.5 mm
- Weight 51g
Scope of delivery
1 Chaservo HV150, mounting material
General | |
Recommended application area | Fuselage and wing servo |
Classification | standard HV servo |
Dimensions and weight | |
Length | 35.5 |
Width | 15 |
Height | 35.5 |
Weight incl. connection cable | 51 |
Specifications | |
High voltage capable | Yes |
Voltage 1 (V1) | 7,4 |
Voltage 2 (V2) | 8,4 |
Max. input voltage | 8,4 |
Regulating time V1/60° | 0.10 |
Regulating time V2/60° | 0.09 |
Pulling load V1 | 30.0 |
Pulling load V2 | 33.0 |
Frequency | 1520us/333HZ |
Number of ball bearings | 2 |
Outer diameter output in mm | 5.9 |
Housing type | Aluminum |
Motor type | 4 Pole Brushless |
Transmission type | steel |
Number of output cogs | 25T/6 Compatible servo arms from Ditex Savöx Hitec and Futaba |
Angle measurement | Potentiometer |
Programmable | Yes |
AKATJA GmbH
Burgwaldring 13
86697 Oberhausen
Germany
info@akatja.de