- Description
Chaservo HV85
Product description and features
The HV85 is a powerful and highly precise HV servo. Equipped with a robust steel gearbox, double ball bearings and an aluminium housing, it promises a robust servo with a long service life.
Suggested application
Performance servo for F3K, F5K, RES gliders and for narrow, thin wings.
Features
- Rated voltage DC 7.4V
- Voltage range DC 6V - 8.4V
- Output Torque
- 6,5 kg·cm @ 6.0V
- 8,2 kg·cm @ 7.4V
- 8,9 kg·cm @ 8.4V
- Holding Torque
- 7,2 kg·cm @ 6.0V
- 9,0 kg·cm @ 7.4V
- 9,8 kg·cm @ 8.4V
- Idle Speed
- 0.16sec/60° @ 6.0V
- 0.12sec/60° @ 7.4V
- 0.11sec/60° @ 8.4V
- Standard angle ±100° = 200
- Operating frequency 1520µs/333Hz
- Operating temperature -20°C ... +65°C
- Housing material Aluminium alloy
- Motor Type Coreless DC
- Gearbox material Hardened steel
- Position sensors Potentiometer
- Programmable Yes
- Ball bearing Double ball bearing
- Dimensions 24mm x 8.5mm x 26.5mm
- Weight 15g
Control signal / PWM interface
- Signal voltage level High: min. 3.3V, max. 5.0V
- Low: min. 0.0V, max. 1.5V
- Pulse range 900µs-2100µs
- Pulse angle
- at -60°/0°/+60°
- 1000µs/1500µs/2000µs
Scope of delivery
1 Chaservo HV85, mounting material
General | |
Recommended application area | F3K, F5K, RES, Wingservo |
Classification | Digital micro |
Dimensions and weight | |
Length | 24 |
Width | 8.5 |
Height | 26.5 |
Weight incl. connection cable | 15.0 |
Specifications | |
High voltage capable | Yes |
Voltage 1 (V1) | 6.0 |
Voltage 2 (V2) | 7.4 |
Max. input voltage | 8.4 |
Regulating time V1/60° | 0.16 |
Regulating time V2/60° | 0.12 |
Pulling load V1 | 6.5 |
Pulling load V2 | 8.2 |
Frequency | 1520us/333HZ |
Number of ball bearings | 2 |
Housing type | Aluminum |
Motor type | Corless DC Motor |
Transmission type | steel |
Number of output cogs | 25T/5 Compatible servo arms from Ditex Savöx Hitec and Futaba |
Angle measurement | Potentiometer |
Programmable | Yes |
AKATJA GmbH
Burgwaldring 13
86697 Oberhausen
Germany
info@akatja.de