- Description
Chaservo DS06
Product description and features
Compact. Light. Universal.Micro Sub. Maximum performance.
The DS06 comes with tons of features and a competition weight of 6g. Equipped with a high quality Hollow Cup DC motor and packaged in an ultra-light, ultra-tough technopolymer fairing, this metal gear digital servo delivers championship performance. Without compromise.
The high-torque Hollow Cup engine not only delivers fast response. Thanks to the coreless design, motor-related vibrations are reduced to an absolute minimum, which is particularly beneficial for positioning accuracy and stability.
Combined with the double ball bearing metal gearbox, the result is an absolutely reliable servo that can stand up to any competition.
Application proposal
Hi-End servos in excellent quality at an affordable price. Especially in F3K, RES and small fun models, a reliable and precise servo is finally available again.
Properties
- Rated Voltage DC 6.0V
- Voltage Range DC 3.5 - 8.4V
- Stalling Torque 0.8 N-cm @ 3.8V
- Stalling Torque 1.5 N-cm @ 6.0V
- Stalling Torque 1.8 N-cm @ 8.4V
- No-load Speed 0.12sec/60° @ 3.8V
- No-load Speed 0.08sec/60° @ 6.0V
- No-load Speed 0.07sec/60° @ 8.4V
- Blocking current 0.58A @ 6.0V
- Rated torque 0.4 N-cm @ 6.0V
- Rated current 0.22A @ 6.0V
- Rated Speed 0.20sec/60° @ 6.0V
- Operating frequency 1520µs/20KHz
- Default angle +/- 60° = 120°
- Operating temperature -10°C up to +65°C
- Soft start Yes
- Programmable Yes
- Ball Bearing 2BB
- Case Material High-strength technopolymer
- Motor Type Hollow Cup DC Motor
- Gear Material Hardened steel gears
- Position Sensors Potentiometer
- Weight 6.2g
- Signal voltage level
- High level:min.3.3V,max.5.0V
- Low level:min.0.0V,max.1.5V
- Pulse range 900µs-2100µs
- Pulse Corresponding Angle -60°/0°/+60° 1000µs/1500µs/2000µs
Scope of delivery
1 Chaservo DS06,fastening material
| General | |
| Recommended application area | F3k, RES, Wingservo |
| Classification | Digital micro sub |
| Dimensions and weight | |
| Length | 28mm |
| Width | 7,4mm |
| Height | 21,7mm |
| Weight incl. connection cable | 6,2g |
| Specifications | |
| High voltage capable | Yes |
| Voltage 1 (V1) | 6.0V |
| Voltage 2 (V2) | 8,4V |
| Regulating time V1/60° | 0,08 sec. |
| Regulating time V2/60° | 0.07 sec. |
| Pulling load V1 | 1.5 Kg |
| Pulling load V2 | 1.8 Kg |
| Number of ball bearings | 2 |
| Housing type | High-strength technopolymer |
| Motor type | Hollow Cup DC Motor |
| Transmission type | Full metal |
| Number of output cogs | 25T/4 Compatible servo arms from Ditex Savöx Hitec and Futaba |
| Angle measurement | Potentiometer |
| Programmable | Yes |
| Soft start | Yes |
