- Description
Chaservo HV06
Product description and features
Fast, accurate setting and created for 2S!
Compact dimensions, powerful inner workings and outstanding performance, the HV series is designed for maximum performance.
Whether in competition, training or during a relaxed after-work round on the course, the components must be reliable. This compact high-performance servo is not only exceptionally powerful, it also delivers maximum positioning accuracy and speed. Thanks to its compact design at only 6mm deep, our HV Champion can be safely used and installed in even the thinnest wings.
Application proposal
Performance servo for F3K, RES and for narrow, thin wings.
Properties
- Rated voltage: DC 8.4 V
- Voltage range: DC 6V – 8.4V
- Actuation force: 15 N·cm @ 6V
- Actuation force: 20 N·cm @ 7.4 V
- Actuation force: 24 N·cm @ 8.4V
- Setting time: 0.07sec/60° @ 6V
- Setting time: 0.06sec/60° @ 7.4V
- Setting time: 0.05sec/60° @ 8.4V
- Standard travel angle: +/- 60° = 120° total travel
- Working frequency: 1520µs/20 kHz
- Operating temperature: -10°C up to +65°C
- Housing material: aluminum alloy
- Motor type: Coreless DC motor
- Gearbox: gears hardened steel
- Position: Sensor Potentiometer
- Programmable: Yes
- Ball bearings: 2 pieces
- Dimensions of the case: 19mm * 6mm * 18.5mm +/- 0.2mm
- Weight: 6.1 g
- Signal voltage level: HIGH=min.3.3V, max.5.0V / LOW=min.0.0V, max.1.5V
- Pulse range: 900µs-2100µs
- Pulse corresponding angle: -60 ° / 0 ° / + 60 ° 1000µs / 1500µs / 2000µs
scope of delivery
1 Chaservo HV06, fastening material
General | |
Recommended application area | F3K, RES, Wingsorvo |
Classification | Digital micro sub servo |
Dimensions and weight | |
Length | 19.0mm |
Width | 6.0mm |
Height | 18.5mm |
Weight incl. connection cable | 6.1g |
Specifications | |
High voltage capable | Yes |
Voltage 1 (V1) | 6.0V |
Voltage 2 (V2) | 7.4V |
Max. input voltage | 8.4V |
Regulating time V1/60° | 0.07 sec. |
Regulating time V2/60° | 0.06 sec. |
Pulling load V1 | 1.5Kg |
Pulling load V2 | 2.0Kg |
Frequency | 1520us/20KHZ |
Number of ball bearings | 2 |
Housing type | Aluminum |
Motor type | Corless DC Motor |
Transmission type | Full metal |
Number of output cogs | 25T/4 Compatible servo arms from Ditex Savöx Hitec and Futaba |
Angle measurement | Potentiometer |
Programmable | Yes |
Soft start | Yes |
AKATJA GmbH
Burgwaldring 13
86697 Oberhausen
Germany
info@akatja.de