JETI Duplex 2.4EX Central Box 310

Item no.:  80001700 EAN:   MPN: J-CB-310
DUPLEX 2.4EX Central Box 310 - Image 1
DUPLEX 2.4EX Central Box 310 - Image 2
DUPLEX 2.4EX Central Box 310 - Image 3
DUPLEX 2.4EX Central Box 310 - Image 4
DUPLEX 2.4EX Central Box 310 - Image 5
DUPLEX 2.4EX Central Box 310 - Image 6
DUPLEX 2.4EX Central Box 310 - Image 7
DUPLEX 2.4EX Central Box 310 - Image 8
DUPLEX 2.4EX Central Box 310 - Image 1DUPLEX 2.4EX Central Box 310 - Image 2DUPLEX 2.4EX Central Box 310 - Image 3DUPLEX 2.4EX Central Box 310 - Image 4DUPLEX 2.4EX Central Box 310 - Image 5DUPLEX 2.4EX Central Box 310 - Image 6DUPLEX 2.4EX Central Box 310 - Image 7DUPLEX 2.4EX Central Box 310 - Image 8
368,90 EUR
incl. VAT and excl. shipping
Total amount: {{ totalPrice }} EUR
This item notice Article is noted
Availability: (Delivery time: )
  • Description
  • Video
  • Downloads

JETI Duplex 2.4EX Central Box 310

Product description and features

The Central Box 310 is designed for a complete management of multiple servos and two receiver batteries for a model with high security requirements. The central box 310 has full unreduced power from the internal BEC on the servo outputs. Especially for the use of powerful and power-hungry servos, the Central Box 310 uses an aluminum housing and avoids the over current protection of the servo slots. The Central Box 310 offers true battery redundancy, DITEX servo telemetry, JETI EX telemetry and up to three receiver inputs (2x 2.4GHz and 1x 900MHz) for full power and RF signal redundancy.

Configuration via JETI Duplex DS/DC transmitters

With JETI Duplex DC/DS transmitters, the full potential of the Central Box 310 can be fully exploited. The device overview of the JETI Duplex DS/DC transmitter makes it easy to perform the entire configuration of the servo outputs, DITEX servo and JETI EX telemetry, function assignment, and more.

Compatibility with Futaba

The Central Box 310 can also be used with two S.Bus receivers (e .g Futaba R7003SB). Setting up and reading out the telemetry values must, however, be realized with a separatly available JETIBOX.

Switching on and off

The switching on and off process of the Central Box 310 is done with the supplied magnetic switch.

Recommended receivers

As receiver e. g. 2 RSat2 or REX3 receivers can be used. Optionally, the use of a REX Assist receiver in combination with a RSat2 receiver is possible, so you get a Central Box with gyro stabilization.

Features

  • Adjustable powerful BEC for voltage stabilization (connection of standard or HV servos)
  • DITEX servo telemetry support
  • Possibility to connect up to 3 receivers with serial communication
  • built-in Expander function with the possibility of independent connection of up to four JETI EX sensors
  • Input for magnetic switch or RC switch
  • Power supply batteries connected via MPX connector
  • 100Hz mode of servo outputs (10ms period)
  • EX telemetry support (measurement of voltage, current, capacity, temperature, etc.)
  • Easy settings changes via DC/DS transmitter („Device explorer“)
  • Robust metal construction with mounting holes

Optional over current protection

The Central Box 310 is not equipped with the built-in overload protection of the servo slots. To protect critical servos such tow coupling servos, retractable landing gears or spoiler servos, the optional overload protection DPSI OCP (Accessories tab) can be used.

Comparison table Central Box 310/320

Feature Central Box 310 Central Box 320
Servo outputs 18 18
Protected servo outputs (for servos with up to 30kg/cm) --- 10
Protected servo outputs (for servos with up to 60kg/cm) --- 8
Receiver inputs up to 3 up to 3
Satellite receiver support Yes Yes
Telemetry Yes Yes
DITEX servo telemetry Yes Yes
Battery inputs 2 2
Supply voltage [V] 4.0 up to 14.0 4.0 up to 14.0
Voltage regulator 5.0 up to 14.0 5.0 up to 14.0
Permanent current [A] 20 20
Peak current (approx. 2 seconds) [A] 80 80
Idle current [µA] 180 180
Operating temperature [°C] ([°F]) -20 to 75 (-4 to 167) -20 to 75 (-4 to 167)
Dimensions [mm] ([in]) 66 x 107 x 21 (2.6 x 4.21 x 0.83) 66 x 107 x 21 (2.6 x 4.21 x 0.83)
Weight [g] ([oz]) 135 (4.76) 135 (4.76)

Delivery contents

1 JETI Duplex 2.4EX Central Box 310, 1 magnetic switch, 1 magnetic key and 1 patch cable.

Important Note

If the Cortex pro is operated on a CentralBox, please be sure to use an additional patch cable for +/- supply. See the detailed bavarianDEMON CORTEXpro Instruction.

Specifications
Input voltage 4.0 up to 14.0
Permanent current 2x 20A
Peak current 80A
Channel outputs 18
Operating temperature range -20 up to 75
Gerneral
Dimensions 65mm x 42mm x 18mm (2.56in x 1.65in x 66mm x 107mm x 21mm
Weight 59g (2.08oz) 135g
Additional Parts for this item:
Item no.: 25128610
Availability: (Delivery time: 1-2 days)
While stocks last! Still available: 9 Pcs
This item notice Article is noted
10,90 EUR
incl. VAT
and excl. shipping
Item no.: 80001227
Availability: (Delivery time: 1-2 days)
This item notice Article is noted
82,90 EUR
incl. VAT
and excl. shipping
Item no.: 80001247
Availability: (Delivery time: 1-2 days)
This item notice Article is noted
42,90 EUR
incl. VAT
and excl. shipping
Item no.: 91300251
Availability: (Delivery time: 1-2 days)
This item notice Article is noted
29,90 EUR
incl. VAT
and excl. shipping
Item no.: 92100251
Availability: (Delivery time: 1-2 days)
This item notice Article is noted
36,90 EUR
incl. VAT
and excl. shipping
Item no.: 93100251
Availability: (Delivery time: 1-2 days)
This item notice Article is noted
55,90 EUR
incl. VAT
and excl. shipping
Item no.: 94100251
Availability: (Delivery time: 1-2 days)
This item notice Article is noted
73,90 EUR
incl. VAT
and excl. shipping
other Options for this item:
Average customer rating: 
Number of Customer reviews: 0
Write an online review of this item and show it to other visitors!