- Description
- Documents
Junsi iCharger 456DUO
Product description and features
- Latest synchronous buck-boost technology for maximum power up to 2200W, for 1-6s LiXx
- DUO charger with 2 equivalent charging outputs with max. 1400W each / total 2200W, 10-49V input voltage
- USB-C port with PD (Power Delivery) for charging current smartphones etc. 5V/3A, 9V/2A, 12V/1.5A
- Micro SD slot for data log // Integrated servo tester // Channel 1 can be used as a power supply 2V-32V, 1A-45A
- Total 4A balancer current (2A per output) discharge power 140W total, 80W per channel
With the new iCharger 456DUO, the renowned manufacturer Junsi has completely renewed the well-known 406DUO charger.
The new 456DUO charger combines the advantages of the well-known Junsi iCharger 406DUO with the latest technology and thus significantly more performance and new functions. The two charging outputs are equipped with high-current-resistant XT90 connectors in order to be able to permanently transfer the power.
The technical data is impressive, 2200W charging power (from >40V), 1-6s LiXx cells and up to 45A charging current are also sufficient for large batteries with high capacity. Of course, all other battery types such as LiHV, LiIo, NiZn, PB, NiCd or NiMh batteries can also be charged.
The discharge power is 140 watts in total (80 watts per output if only one output is used), but can be increased to up to 2200 watts using an external load (discharge resistor). Of course, the iCharger 456DUO also handles regenerative charging. Here, the battery capacity is fed back into the supply battery, for example, from a full flight battery.
The balancer current of 4 amps in total (2A per output) always ensures perfectly balanced cell voltages.
A USB-C PD port for charging smartphones etc (5V/3A, 9V/2A, 12V/1.5A) or for software updates is also installed. The micro SD slot can be used to log the data, but also for future updates.
The "Digital Power" function is new. One output can be used as a stabilized power supply. The output voltage can be set from 2V to 32V, the current from 1A-45A (Please note that an appropriate supply must be available for this!)
A servo tester is also integrated, please note that an external power supply is required!
The menu navigation is almost identical to the well-known Junsi iCharger 308DUO, 406 DUO or 4010DUO.
A 2.8" IPS LCD display ensures good legibility even in low light.
An instruction in English is included with the loader in the form of a CD, the German version can be downloaded from us.
All Junsi chargers of the X and DUO series have been developed and approved for use in model construction. Industrial use is not intended and therefore not permitted! All Junsi chargers may only be operated with power supplies developed for model making! No AGM batteries may be charged in the PB program!
Scope of delivery
Junsi iCharger 456DUO, CD with instructions and software
SieBra GmbH & Co. KG
Christian-Liebrecht-Straße 6
58739 Wickede
Germany
info@rc-dome.de