Junsi iCharger DX12

Junsi iCharger DX12

Product description and features

With the new iCharger DX12, the renowned manufacturer Junsi has launched a DUO charger in a compact format.

The new DX12 charger combines the advantages of the well-known Junsi iCharger DUO series with the portability of a small pocket charger. Despite the small dimensions of 111.5 x 128.5 x 40 mm, no compromises have been made in terms of performance and ease of use. The newly developed rotary wheel has a very good pressure point and makes operation much easier.

The technical data is impressive, 1700W charging power (from >25V), 1-12s LiXx cells and up to 30A charging current are also sufficient for large batteries with high capacity. Of course, all other battery types such as LiHV, LiIo, NiZn, PB, NiCd or NiMh batteries can also be charged.

The discharge power is 80 watts in total (50 watts per output if only one output is used), but can be increased to up to 3000 watts using an external load (discharge resistor). Of course, the iCharger DX12 is also capable of regenerative charging. Here, for example, battery capacity is fed back into the supply battery from a full flight battery.

The balancer current totalling 4 amps (2 amps per output) always ensures perfectly balanced cell voltages.

A USB-C PD port for charging smartphones etc. (5V/3A, 9V/2A, 12V/1.5A) or for software updates is also integrated. The micro SD slot can be used for data storage but also for future updates.

A servo tester is also integrated, please note that an external power supply is required!

The menu navigation is almost identical to the familiar Junsi iCharger 308DUO, 406 DUO or 4010DUO.

A 2.4" IPS LCD display ensures good readability even in poor lighting conditions.

A manual in English is included with the loader in the form of a CD, the German version is available for download.

All Junsi chargers in the X and DUO series have been developed and approved for use in modelling. Industrial use is not intended and therefore not permitted! All Junsi chargers may only be operated with power supply units that have been developed for modelling! AGM batteries must not be charged in the PB programme!

Technical data

• Charging current adjustable per output: 0.05-30A
• Charging current adjustable in synchronous mode: 0.05-50A
• Max. Number of NiCd/NiMH batteries: 1-32
• Input voltage: 11-53V DC
• Length (mm): 111.5
• Max. number of LiPo cells: 12
• Max. number of LiHv cells: 12
• Max. charging power at one output: 1200W
• Max. Power: 1700W
• Charging power Max Syncron: 1800W
• Balancer equalising current per output: 2A
• Max. Discharge power: 3000W
• Discharge current Adjustable for regenerative power supply: 30A
• Max. Charging current: 30A per channel, 50A in sync. mode
• Max. Max. voltage lead batteries: 40V
• Balancer equalising current in sync. mode: 4A
• Discharge power per output: 50W
• Input current limit: 65A
• Max. discharge power in synchronous mode: 80W without external load
• Micro SD card slot: Yes
• Integrated power supply unit: No
• Plug type charging output: XT60
• Plug type input: XT90

Scope of delivery

Junsi iCharger DX12, CD with instructions and software