- Description
- Downloads
Junsi iCharger DX6 Charger 1500W up to 6S LiPo
Product description and features
With the new iCharger DX6, renowned manufacturer Junsi has launched a DUO charger in a compact format
.The new DX6 charger combines the advantages of the well-known Junsi iCharger 406DUO with the portability of a small pocket charger. Despite the small dimensions of 92x112.5x40 mm, no compromises have been made in terms of performance and usability. no compromises have been made in terms of performance and usability. The newly developed rotary wheel has a very good pressure point and facilitates operation enormously.
The technical data is impressive, 1500W charging power (from >25V), 1-6s LiXx cells and up to 30Amp charging current are also sufficient for large batteries with high capacity. Of course, all other battery types all other battery types such as LiHV, LiIo, NiZn, PB, NiCd or NiMh batteries.
.The discharge power is 60 watts in total (40 watts per output if only one output is used), but can be increased up to 1600 watts by means of an external load (discharge resistor). Of course the iCharger DX6 is also capable of regenerative charging. Here, the battery capacity is fed back into the supply battery from a full flight battery, for example.
.The balancer current of 4 amps total ( 2A per output) always ensures perfectly balanced cell voltages.
A USB-C PD port for charging smartphones etc (5V/3A, 9V/2A, 12V/1.5A) or for software updates is also built in. The micro SD slot can be used to log data, but also for future updates. can be used.
A servo tester is also integrated, but please note that an external power supply is necessary!
The menu navigation is almost identical to the well-known Junsi iCharger 308DUO, 406 DUO or 4010DUO.
A 2.4" IPS LCD display ensures good readability even in low light.
An English manual is included with the charger in the form of a CD, the German version can be downloaded from us.
All Junsi chargers of the X and DUO series are developed and approved for use in model making. Industrial use is not intended and is therefore not permitted!
Specifications
- Weight (g): 360
- Balancer accuracy (depending on setting): 10mV
- Max. Number of NiCd/NiMH batteries: 15
- Max. Voltage lead batteries: 24V
- Balancer compensation current per output: 2A
- Max. Discharge power: 60
- Max. Charging current: 32A asynchronous, 50A synchronous
- Charging current adjustable per output: 30A
- Discharge power when discharging at one output: 40W
- Integrated balancer for up to: 6S
- Input voltage: 9-49VD34/li>
- Charging power Max. Watt: 1500W
- Discharge current adjustable with feedback: 50A
- Length (mm): 92.0
- Width (mm): 112.5
- Height (mm): 40
- External high-current discharge asynchronous: 1600W
- Input current limit: 65A
- Micro SD card slot: Yes
- Fan: Yes
- Reflex charge support: Yes
- Balancer integrated: Yes
- Integrated power supply: No
Scope of delivery
iCharger DX6 charger, CD with instructions and software
SieBra GmbH & Co. KG
Christian-Liebrecht-Straße 6
58739 Wickede
Germany
info@rc-dome.de