- Description
- Documents
Heat-conducting adhesive (2x2ml), WLK DK 4
Product description
The heat-conducting adhesive from Fischer Elektronik is suitable for the safe and thermal bonding of electronic components such as high-power LEDs or mechanical components. It is a temperature-resistant, impact-resistant, solvent-free and thermally conductive epoxy-based two-component adhesive filled with aluminium oxide with a short pot life. The heat-conducting adhesive bonds porous and non-porous surfaces of metals, glass, ceramic materials and almost all plastics. The mixing (1:1) of hardener and binder is done by a static mixing tube with Luer-Lock system.
Features
- Thermal conductivity 1 W/mK
- Mixing ratio: 1:1
- Temperature range: -50° C to +145° C
- Curing: approx. 16 hours at room temperature, 4 hours at 60° C
- Further processing: after approx. 4-6 hours (depending on layer thickness)
Delivery contents
1 syringe 4ml and 3 mixer WLK M 4.
Hacker Motor GmbH
Schinderstrassl 32
84030 Ergolding
Germany
info@hacker-motor.com