MEZON EVO 70 BEC LMR

MEZON EVO 70 BEC LMR

Product description and features

The MEZON EVO controllers are the successors to the previous product line of MEZON PRO controllers. The main advantages of this series are very effective cooling, full telemetry, speed control for Heli operation and F3A mode. MEZON EVO controllers have an aluminum housing (except LMR types), which contributes to efficient cooling. The setup wizard helps the user to set up the controller Set up intuitively and quickly using the JETI duplex transmitter. The MEZON EVO is an absolutely universal controller for airplane, helicopter, ship and vehicle models for users not only from JETI Duplex transmitters, but also other RC systems.

LMR (Limited Motor Run) - These controllers are specially designed to be as light as possible. This series is not in a metal case and is mainly intended for glider models. Here, the continuous motor running is limited to a few seconds and the subsequent gliding flight serves to cool down the controller. The SW of the controller does not limit the runtime, it only monitors the maximum temperature. This prevents the controller from being destroyed by overheating. It is the pilot's responsibility to ensure proper operation.

Functions

• Full EX telemetry (voltage, current, capacity, revolutions, etc.)
• Setting up the controller via EX-bus communication from the JETI duplex transmitter via the device overview
• Precise controller and full support for helicopter models
• F3A mode for aerobatic models
• Adjustable brake with energy recovery into the battery
• Powerful BEC with adjustable output voltage
• large supply voltage range 2 - 12 Lixx (max. 51V)
• bidirectional motor running possible (forward/backward)
active proportional brake
• compact dimensions
• User-friendly setup wizard for quick and easy setup ("Quick Setup mode")
• an "Expert mode" with access to all setting options
• No heat sink, "LMR" means "Limited Motor Runtime" = for short motor runtimes, e.g. when sailing
• high efficiency
• Firmware upgrade possible
• wide range of adjustable parameters

Specifications

• Weight [g]: 85
• Dimensions [mm]: 26 x 18 x 83
• Continuous current [A]: 70
• Peak current (max 30s) [A]: 70
• Telemetry: Yes
• Application temperature [°C]: -10 to 85
• Supply voltage [V]: 6 to 51
• LiXX batteries: 2 to 12
• Voltage BEC [V]: 5 to 8.4
• Resistance switched through [mO]: 2 x 0.475
• Wire cross-section (input/output) [mm²]: 4.0 / 2.5
• OPTO: No
• Continuous current BEC [A]: 15
• Short current BEC 1s [A]: 30
• Housing: heat shrink tubing

Scope of delivery

1x MMEZON EVO 70 BEC LMR, 1x manual