Q80-13XS kv225 F3A

Item no.: 38798013 EAN: 4250320229988 MPN:

Hacker Motor GmbH

Q80-13XS kv225 F3A

Product description and features

The Q80-13XS F3A competition motor for models up to approx. 5kg. The Hacker R&D department has done a great job in the development of this high performance motor. The weight has been reduced by more than 100g compared to the previous Q80-S thanks to the modified end shield and the shortened overall length. The Q80 external rotor has an innovative motor design.

The new geometry in combination with the short design enables optimum cooling. Thanks to the classic mounting on the motor bulkhead (front mount), the Q80 is positioned in such a way that the airflow from the propeller can optimally flow through the entire motor during operation.

The motor has outstanding efficiency and offers maximum power and optimum performance. Every Q80 motor is wound, assembled and extensively tested by hand.

Quality ‘Made in Germany’ for the highest demands.

Ideal for F3A competition models up to 5 kg, classic aerobatics up to 5.5 kg, sports models, motorised models and warbirds up to 6 kg.

Accessories

You will find suitable controllers, batteries and propellers in the Accessories tab.

Scope of delivery

1x Q80-13XS kv225 F3A, prop driver and instructions manual.

Drive recommendation

Q80-13XS kv225 F3A
Item no.: 38798013
Propeller	Xoar Carbon 20x13 F3A	Xoar 20x13 F3A
LiPo	10S	10S
Voltage [V]	37	37
Current [A]	76	81
Power [W]	2712	2997
RPM	6520	6490
Controller [A]	99	99
Timing [°]	25	25

Hacker Motor Shop

Specifications
max. power range [W] (max.15 sec.)	2800
Poles	28
Turns	13
Idle current (I0) at 8.4V [A]	1,0
Internal resistance (Ri) [Ohm]	0,024
Recommended timing [°]	25
Switching Frequency [kHz]	8
Controller recommendation [A] (depending on setup)	90 - 125
Idle speed per volt (kv)	225
Dimensions and weight
Weight [g]	520
Length [mm]/[in]	69
Outer diameter [mm]/[in]	88,5
Shaft diameter [mm]/[in]	8
Delivery contents
Prop Adapter	Ja
Mounting cross	Nein
Gold plug mm (soldered)	4mm
Backmount mountable	Nein
Front mountable	Ja

Additional Parts for this item:

JETImodel SBEC

Item no.: 22985471

Availability: (Delivery time: 1-2 days)