Q80-14XS kv209 Senstrol F3A

Item no.:  38799014 EAN: 4250320252290  MPN: 
Q80-14XS kv209 Senstrol F3A - Image 1
Q80-14XS kv209 Senstrol F3A - Image 2
Q80-14XS kv209 Senstrol F3A - Image 3
Q80-14XS kv209 Senstrol F3A - Image 4
Q80-14XS kv209 Senstrol F3A - Image 1Q80-14XS kv209 Senstrol F3A - Image 2Q80-14XS kv209 Senstrol F3A - Image 3Q80-14XS kv209 Senstrol F3A - Image 4
Hacker Motor GmbH
more articles from Hacker Motor GmbH
549,00 EUR
incl. VAT and excl. shipping
Total amount: {{ totalPrice }} EUR
currently not available
This item notice Article is noted
Availability: (Delivery time: )
  • Description

Q80-14XS Senstrol F3A

Product description and features

The Q80-14XS kv209 F3A competition motor for models up to approx. 5kg. The Hacker R&D department has done a great job in the development of this high performance motor. The weight has been reduced by more than 100g compared to the previous Q80-S thanks to the modified end shield and the shortened overall length. The Q80 external rotor has an innovative motor design.

 

Quality ‘Made in Germany’ for the highest demands.
 

The motor identification chip included with the Hacker Senstrol motors contains all the data relevant to the motor and provides the necessary motor parameters for the Senstrol controller during operation. This completely eliminates the need for separate programming of the motor parameters. A great deal of this data can be changed according to individual requirements, but not beyond preset limit values.
 

The motors in the Senstrol series are optimised for operation with the MASTER Senstrol 120A Opto controller, but can be operated with any commercially available brushless controller of the appropriate size.

Scope of delivery

1x Q80-14XS Senstrol F3A, prop driver and instructions.

Drive recommendation

Q80-14XS Senstrol F3A
Item no.: 38799014
Propeller XOAR 21x14 XOAR 21x13 F3A
LiPo 10S 10S
Voltage [V] 37 37
Current [A] 75 74
Power [W] 2775 2738
RPM 5950 6000
Controller [A] Master Senstrol 120A Opto Master Senstrol 120A Opto
Timing [°] durch ID Chip vorgegeben durch ID Chip vorgegeben

 

 

Hacker Motor Shop
Specifications
max. power range [W] (max.15 sec.) 2800
Poles 28
Turns 14
Idle current (I0) at 8.4V [A] 0,9
Internal resistance (Ri) [Ohm] 0,025
Recommended timing [°] durch ID Chip vorgegeben
Switching Frequency [kHz] durch ID Chip vorgegeben
Controller recommendation [A] (depending on setup) Master Senstrol 120
Idle speed per volt (kv) 209
Dimensions and weight
Weight [g] 528
Length [mm]/[in] 69
Outer diameter [mm]/[in] 88,5
Shaft diameter [mm]/[in] 8
Delivery contents
Prop Adapter Ja
Mounting cross Nein
Gold plug mm (soldered) 4
Backmount mountable Nein
Front mountable Ja
Additional Parts for this item:
other Options for this item:

Hacker Motor GmbH
Schinderstrassl 32
84030 Ergolding
Germany
info@hacker-motor.com

Average customer rating: 
Number of Customer reviews: 0
Write an online review of this item and show it to other visitors!