- Description
Servo SAVÖX SA-1283SG+
Product description and features
- New + version with softstart, Sanwa SSR mode
- Extremely powerful digital servo, ideal for wing models, robust low-backlash titanium gearbox
- 0,16/0,13 sec/60 degrees and 25/30 kg*cm at 4,8/6,0 Volt
- Dimensions (L/W/H): 40.8 x 20.2 x 36.4 mm
- Weight: 80 grams
- The SA-1283SG+ is an extremely powerful servo of the standard size which is very well suited for use in wing models. Of course it can also be used in RC cars. The application as swashplate servo for scale helicopters up to the 700 class is another option.
The new + version of the well-known SA-1283SG servo differs minimally from its predecessor both visually and technically. A soft start which moves the servo slowly into the start position when switched on and the Sanwa SSR mode distinguish the + version.
The SA version of the 1283SG servo is specially designed for use in wing models. The A in SA stands for Aircraft. Gearbox and software are optimised for this application, the low backlash titanium gearbox is extremely robust and reliable. The software has also been adapted, the holding force around the zero position has been optimised here. Suitably reinforced servo arms are included in the scope of delivery and are specially designed for fixed-wing models.
Included in delivery: Servo arm GRP reinforced plastic 1 x single arm 12 - 18 mm / 1 x single arm 15 - 28 mm / 1 x single arm 23 - 38 mm / 1 x double arm 23 - 38 mm
Properties
Operating time S2/60° (sec): 0.13Operating time S1/60° (sec): 0.16
Width (mm): 20,2
Actuating force S1 (kg*cm): 25
Actuating force S2 (kg*cm): 30
Height (mm): 36,4
Voltage range: 4.8V-6V
Length (mm): 40,8
Weight (g): 80
Control frequency: Up to 333Hz, 1520us centre pulse
High voltage capability up to 8.4V: No
Voltage 1 (volts): 4,8
Recommended use: Helicopter, aeroplane, car
Ball bearings (number): 2
Voltage 2 (volts): 6,0
Motor type: Bell-type armature motor
Output teeth (number): 25
Gear type: Steel
Housing type: Full metal
Classification: Standard
Suggested application
Steering servo for RC cars, model aircraft
Scope of delivery
1x SAVÖX SA-1283SG+ servo, servo arm and mounting material.
General | |
Recommended application area | Helicopter, aircraft, car |
Classification | Standard |
Dimensions and weight | |
Length | 40.8mm (1.61 in) |
Width | 20.2mm (0.8in) |
Height | 36.4mm (1.43in) |
Weight | 80.0g (2.82oz) |
Specifications | |
High voltage capable | no |
Voltage 1 (V1) | 4.8V |
Voltage 2 (V2) | 6.0V |
Regulating time V1/60° | 0.16s |
Regulating time V2/60° | 0.13s |
Pulling load V1 | 25.0kg |
Pulling load V2 | 30.0kg |
Number of ball bearings | 2 |
Housing type | Full metal |
Motor type | Coreless motor |
Transmission type | Steel |
Number of output cogs | 25 |