Servo SAVÖX SB-3290SG

New
Item no.:  80101136 EAN: 4710006994819  MPN: 
Servo SAVÖX SB-3290SG - Image 1
Servo SAVÖX SB-3290SG - Image 2
Servo SAVÖX SB-3290SG - Image 1Servo SAVÖX SB-3290SG - Image 2
4710006994819
SB-3290SG
139,90 EUR
incl. VAT and excl. shipping
Total amount: {{ totalPrice }} EUR
This item notice Article is noted
Availability: (Delivery time: )
  • Description

Servo SAVÖX SB-3290SG

Product description and features

  • More power with less weight! 75kg*cm at 8.4V with only 72 grams! Significantly minimised operating noise
  • Newly developed 8-pole brushless motor integrated in the housing, resulting in 20% lower operating temperature after 5 minutes than the SB-2290SG
  • Triple ball bearing, patented design, lower power consumption with the same performance compared to SB-2290SG
  • High-voltage digital servo up to 8.4V, 32-bit MCU (Motor Control Unit), longer continuous output without power drop
  • High-quality full metal housing with soft start, 25-tooth output, quiescent current approx. 80mA compared to 250mA for the SB-2290SG
  • Weight 72g

With the new SB-3290SG servo from SAVOX, the Taiwanese manufacturer Savöx has once again achieved a revolution in servo technology. The newly developed 8-pole brushless motor of this monster not only ensures a lower weight (72 grams) compared to the SB-2290SG (81 grams), but also more power and significantly less heat development. After 5 minutes of operation, it remains up to 20% cooler than its predecessor, the SB-2290SG. Thanks to this significant improvement, the servo delivers maximum power for much longer and the model feels much harder, more direct and more precise.

Thanks to the latest technology, the SB-3290SG is significantly quieter and barely perceptible in normal operation. The "whirring" familiar from digital servos has been virtually eliminated without having to accept any disadvantages.

Especially during extreme flights with high loads, the increase in performance is unrivalled. The completely new motor design with the newly developed 32-bit MCU (Motor Control Unit) brings with it many advantages that offer ambitious 3D and aerobatic pilots new possibilities in flight.
In comparison, the quiescent current of the SB-3290SG is approx. 80mA, while the SB-2290SG requires approx. 250mA.

The lower weight is particularly advantageous for large models in the 25kg range. If the SB-3290SG is installed in the elevator, the 9 grams per servo are clearly noticeable, making it easier to find the ideal centre of gravity.

The SB-3290SG has been tried, tested and improved step by step over months in countless tests with the best pilots in Germany, until we have reached a point where we can speak of a real revolution and not just product maintenance!

To make individual wiring easier, the negative pole of the cable is no longer completely black as on the SB-2290SG, but grey and therefore easier to distinguish.
Of course, the SB-3290SG has a soft start, i.e. the servo slowly moves to the desired position when the voltage is applied / the receiver is switched on.

The torque of this monster leaves nothing to be desired, here are the technical data at 6, 7.4 and 8.4V

Properties

Operating time S2/60° (sec): 0.11
Actuating time S1/60° (sec): 0.13
Length (mm): 20.2
Height (mm): 38.7
Voltage range: 4.8V-8.4V
Width (mm): 40.3
Actuating force S1 (kg*cm): 65
Weight (g): 72
Actuating force S2 (kg*cm): 75
Actuating frequency: Actuating frequency up to 333Hz, centre pulse 1520us
High-voltage capable up to 8.4V: Yes
Packaging: Standard
Recommended applications: Helicopter, aeroplane, car
Output teeth (number): 25
Ball bearing (number): 3
Voltage 1 (Volt): 7,4
Motor type: Brushless motor
Gearbox type: Steel
Housing type: Full metal
Voltage 2 (Volt): 8,4
Classification: Standard

Application suggestion

For large models or helicopters, RC cars or scale helicopters

Scope of delivery

1x SAVÖX SB-3290SG servo, servo arm and mounting material.

 
General
Recommended application area Helicopter, aeroplane, car
Classification Standard
Dimensions and weight
Length 40,3
Width 20,2
Height 38,7
Weight 72
Specifications
High voltage capable Yes
Voltage 1 (V1) 7,4
Voltage 2 (V2) 8,4
Regulating time V1/60° 0,13
Regulating time V2/60° 0,11
Pulling load V1 65
Pulling load V2 75
Frequency 333
Number of ball bearings 3
Outer diameter output in mm 5,9
Housing type full metal
Motor type Brushless motor
Transmission type Metal
Number of output cogs 25
Soft start yes
Additional Parts for this item:
Item no.: 80101021
Availability: (Delivery time: 1-2 days)
This item notice Article is noted
6,90 EUR
incl. VAT
and excl. shipping

SieBra GmbH & Co. KG
Christian-Liebrecht-Straße 6
58739 Wickede
Germany
info@rc-dome.de

Average customer rating: 
Number of Customer reviews: 0
Write an online review of this item and show it to other visitors!