- Description
Servo SAVÖX SA-1256TG+
Product description and features
The SA-1256TG+ is a powerful servo of the standard size which is very well suited for use in wing models. Of course it can also be used in RC cars. The application as swash plate servo for scale helicopters up to 700 class is another option.
The new + version of the well-known SA-1256TG servo differs minimally from its predecessor both visually and technically. A soft start which moves the servo slowly into the start position when switched on and the Sanwa SSR mode distinguish the + version.
The SA version of the 1256TG servo is specially designed for use in fixed-wing models. The A in SA stands for Aircraft. Gearbox and software are optimised for this application, the low-backlash titanium gearbox is extremely robust and reliable. The software has also been adapted, the holding force around the zero position has been optimised here. Suitably reinforced servo arms are included in the scope of delivery and are specially designed for fixed-wing models.
Properties
Actuating time S2/60° (sec): 0.15
Actuating time S1/60° (sec): 0.18
Actuating force S1 (kg*cm): 16
Actuating force S2 (kg*cm): 20
Width (mm): 20,2
Height (mm): 37.2
Voltage range: 4.8V-6V
Length (mm): 40,3
Weight (g): 64
Drive frequency: Up to 333Hz, 1520us centre pulse
High voltage capability up to 8.4V: No
Voltage 1 (Volt): 4.8
Recommended use: Helicopter, aeroplane, car, boat
Ball bearing (number): 2
Voltage 2 (Volt): 6,0
Motor type: Bell-type armature motor
Housing type: Part metal
Output teeth (number): 25
Gear type: Titanium
Classification: Standard
Suggested application
Low profile servo for helicopter, aircraft, car
Scope of delivery
1x SAVÖX SA-1256TG+, servo arm and mounting material.