Servo SAVÖX SV-1254MG+

Servo SAVÖX SV-1254MG+

Product description and features

• New + version with softstart, Sanwa SSR mode
• Dimensions (L/W/H): 40.8 x 20.2 x 25.4 mm Weight: 46 grams
• 0,085/0,075 sec/60 degrees and 15/18 kg*cm at 7,4/8,4 Volt
• High-voltage low-profile servo 4.8-8.4V, operation on 2s LiPo
• Possible applications: Steering servo for RC cars, model airplanes with little overall depth.

The SV-1254MG+ is a powerful servo of the low-profile design which is very well suited for use in wing models. Of course it can also be used in RC cars. The application as swashplate servo for scale helicopters up to the 700 class is another option.

The new + version of the well-known SV-1254MG+ servo differs minimally from its predecessor both optically and technically. A soft start which moves the servo slowly into the start position when switched on and the Sanwa SSR mode distinguish the + version.

The technical data of the servo leaves nothing to be desired: 0.085/0.075 sec/60 degrees and 15/18 kg*cm at 7.4/8.4 volts.

Drive frequency up to 333Hz, centre pulse 1520us

Like all HV servos from Savöx, the SV-1254MG+ can of course be operated with up to 8.4V!

Translated with www.DeepL.com/Translator (free version)

Features

Actuating time S2/60° (sec): 0.075
Actuating time S1/60° (sec): 0,085
Actuating force S1 (kg*cm): 15
Actuating force S2 (kg*cm): 18
Width (mm): 20,2
Height (mm): 25,4
Voltage range: 4.8V-8.4V
Length (mm): 40.8
Weight (g): 46
Drive frequency: Drive frequency up to 333Hz, centre pulse 1520us
High-voltage capability up to 8.4V: Yes
Gear type: Metal/plastic
Recommended use: Helicopter, aeroplane, car, boat
Classification: Low Profile
Ball bearings (number): 2
Motor type: Bell-type armature motor
Housing type: Part metal
Output teeth (number): 25
Voltage 1 (volts): 7,4
Voltage 2 (volts): 8,4
Suggested use
Steering servo for RC cars, model airplanes with little installation depth