- Description
Servo SAVÖX SW-1210SG+
Product description and features
- Waterproof digital servo
- New + version with soft start, Sanwa SSR mode
- Powerful 37kg cm digital servo, ideal for helicopters, aircraft, cars and boats Robust, low-backlash steel gearbox
- Waterproof digital servo to IP67, HV capable (8.4V)
- Dimensions (L/W/H): 40.6 x 20.7 x 42.0 mm Weight: 71 grams
- 0.13/0.12 sec/60 degrees and 32/37 kg*cm at 7.4/8.4 volts
The SW-1210SG+ is a powerful, waterproof and highly reliable standard size servo, ideal for use in helicopters, aircraft, cars and boats.
The new + version of the well-known SW-1210SG+ servo differs slightly from its predecessor both visually and technically. The + version is characterised by a soft start which moves the servo slowly into the start position when switched on and the Sanwa SSR mode.
The SW-1210SG+ is protected to IP67 and is therefore ideal where water could be present. It is HV capable, i.e. it can be operated directly on a 2S LiPo with up to 8.4V!
The technical data speaks for itself: 0.13/0.12 sec/60 degrees and 32/37 kg*cm at 7.4/8.4 volts, the robust steel gearbox ensures durability even in tough conditions
Properties
Operating time S2/60° (sec): 0.12
Operating time S1/60° (sec): 0.13
Width (mm): 20.7
Actuating force S1 (kg*cm): 32
Actuating force S2 (kg*cm): 37
Voltage range: 4.8V-8.4V
Length (mm): 40.6
Height (mm): 42
Weight (g): 71
Control frequency: Up to 333Hz, 1520us centre pulse
High-voltage capable up to 8.4V: Yes
Recommended applications: Helicopter, aeroplane, car, boat
Ball bearing (number): 2
Motor type: coreless motor
Housing type: Part metal
Output teeth (number): 25
Voltage 1 (Volt): 7,4
Gear type: Steel
Voltage 2 (Volt): 8,4
Classification: Standard
Application suggestion
Steering servo for RC cars, robust low-backlash steel gearbox
Scope of delivery
1x Servo SAVÖX SW-1210SG+, Servo arms and mounting material.
General | |
Recommended application area | Car |
Classification | digital Standart-Servo |
Dimensions and weight | |
Length | 40,6 |
Width | 20,7 |
Height | 42 |
Weight | 71 |
Specifications | |
High voltage capable | yes |
Voltage 1 (V1) | 7,4 |
Voltage 2 (V2) | 8,4 |
Max. input voltage | 8,4 |
Regulating time V1/60° | 0,13 |
Regulating time V2/60° | 0,12 |
Pulling load V1 | 32 |
Pulling load V2 | 37 |
Frequency | 333 |
Number of ball bearings | 2 |
Outer diameter output in mm | 5,9 |
Housing type | Partial metal |
Motor type | Coreless Motor |
Transmission type | Steel |
Number of output cogs | 25 |
Soft start | yes |
SieBra GmbH & Co. KG
Christian-Liebrecht-Straße 6
58739 Wickede
Germany
info@rc-dome.de