- Description
Demountable, ball bearing mounted support plate
The support plate braces the servo's output shaft. So the clearance is reduced (especially in the long term) and a better power transmission is ensured.
The plate is suitable for servos with M3 output shafts (e. g. Graupner DS 368/DS 3068, Futaba S3150/S3155,...) with a thickness of approx. 11mm (0.43in).
With the enclosed pads (1mm and 4mm thickness) the support plate can be adjusted to the servo's thickness.
- Width: 29.4mm (1.16in)
- Weight complete (depending of used pad): 2.5g to 3.3g (0.09oz to 0.12oz)
RCsolutions
Hofstrasse 14
8181 Höri
Switzerland
info@rcsolutions.ch