The Spin Pro series offers advanced programming features, such as To "Auto-timing" and the direct programming of the batteryvoltage to all accu types and battery requirements. Furthermore, an additional transfer of real telemetry functions on the Jeti Duplex system is possible (engine RPM, battery voltage, temperature control, fault diagnosis).
Note: no Duplex EX telemetry, i.e. display of these values "only" in the JetiBox mode of the JETI Duplex DC/DS transmitters and the JetiBox Profi.
Our recommendation: to use this type of regulator mainly for glider drives. We recommend the controllers with the design of the Spin 99/125 or Basic 90 for long partial load runs at high load.
Tecnical Datas:
|
Operating Voltage / Cell count
|
6-24NC /2-8 LiPo /6-34V
|
|
Dimensions
|
78 x 27 x 23 mm
|
|
Resistance (mOhm)
|
2 x 1,0
|
|
Switching BEC
|
Switching BEC, 5,5V
|
|
Max. Servonumber
|
8
|
|
Helimode / constant RPM inside
|
Yes
|
|
Weight
|
80g
|
|
Nomina Current (2,2Ah batt.)
|
100
|
|
FETs
|
48
|
|
Set Up
|
Yes (Jeti Box)
|
