aeronaut Z-Spinner (CN) 55mm

Item no.:  21725919 EAN: 4012230118192  MPN: 
aeronaut Z-Spinner (CN) 55mm - Image 1
aeronaut Z-Spinner (CN) 55mm - Image 2
aeronaut Z-Spinner (CN) 55mm - Image 3
aeronaut Z-Spinner (CN) 55mm - Image 4
aeronaut Z-Spinner (CN) 55mm - Image 1aeronaut Z-Spinner (CN) 55mm - Image 2aeronaut Z-Spinner (CN) 55mm - Image 3aeronaut Z-Spinner (CN) 55mm - Image 4
4012230118192
725179
19,90 EUR
incl. VAT and excl. shipping
Total amount: {{ totalPrice }} EUR
This item notice Article is noted
Availability: (Delivery time: )
  • Description

aeronaut Z-Spinner (CN) 55mm

The spinner series for top aerodynamic performance.

The Z-spinners combine the advantages of the CN spinners (cool nose with cooling air openings) and the offset Z centre sections. Thanks to the angled aluminium centre sections, the folding propeller blades fit even closer to the fuselage and thus ensure less drag during gliding. The spinners with the centre pieces are designed for slim E-glider fuselages, but can also be advantageous for wooden fuselages in box construction, for example, if they are sanded round.

 

The centre pieces of the spinner sizes 32-42mm are interchangeable, e.g. 38mm spinner caps can be operated with the centre piece of the 42mm spinner. These combination options offer further optimisation potential, as they allow finer tuning to the respective fuselage. The 30mm spinner has its own centre piece, which cannot be combined with the other spinner caps.

The Z-spinner contains a spinner cap (diameter 55mm) made of white plastic (very easy to paint), milled aluminium centre piece with integrated holder for clamping cone, special prop rubber for folding the propeller blades, mounting screws for spinner cap and propeller blades.

The diameter of the spinner cap is 55 mm. The centre distance (d) of this spinner is 52 mm. This means that the diameter of the propeller blades increases by 10 mm (0.39"). Example: A propeller with a diameter of 12" effectively has a diameter of 12.39" at this centre piece (the size specifications for folding propellers always refer to the use of a centre piece with centre distance d=42 mm).

 

IMPORTANT: An additional clamping cone must always be purchased to match the motor shaft used. You can find these in the section: Clamping cone for Z-spinners  

Additional Parts for this item:
Spareparts for this item:
Item no.: 21725906
Availability: (Delivery time: 1-2 days)
This item notice Article is noted
3,30 EUR
incl. VAT
and excl. shipping
Item no.: 21725907
Availability: (Delivery time: 1-2 days)
This item notice Article is noted
3,30 EUR
incl. VAT
and excl. shipping
Item no.: 21725908
Availability: (Delivery time: 1-2 days)
This item notice Article is noted
3,30 EUR
incl. VAT
and excl. shipping

aero-naut
Modellbau GmbH + Co. KG
Stuttgarter Straße 18-22
72766 Reutlingen
Germany
verkauf@aeronaut.de

Average customer rating: 
Number of Customer reviews: 0
Write an online review of this item and show it to other visitors!