Q80-11 PSD kv205 Senstrol

Item no.:  38798519 EAN: 4250320242161  MPN: 
Q80-11 PSD kv205 Senstrol - Image 1
Q80-11 PSD kv205 Senstrol - Image 2
Q80-11 PSD kv205 Senstrol - Image 3
Q80-11 PSD kv205 Senstrol - Image 1Q80-11 PSD kv205 Senstrol - Image 2Q80-11 PSD kv205 Senstrol - Image 3
579,00 EUR
incl. VAT and excl. shipping
Total amount: {{ totalPrice }} EUR
This item notice Article is noted
Availability: (Delivery time: )
  • Description

Q80-11 PSD Senstrol electric motor

Product description and features

The hacker R & D team around the developer Martin Vilsmeier has once again achieved a big hit with this new Q80-11 PSD Senstrol!

An uncompromising revision has succeeded in further improving the weight-performance ratio. The overall length has shrunk to the size of the Q80-XS. The most important reason why the available power is significantly higher than the normal Q80, especially with this engine, is the unique Senstrol technology. Not only the motor and controller are 100% matched, but the motor is driven by a real sine wave. By this control the motor can be operated with more power and has a higher efficiency at the same time with less power loss and heat generation. Compared to the standard Q80-11 the new Q80-11 PSD Senstrol comes with up to 25% more power!

Like every Q80 also this Q80-11 PSD Senstrol is built, tested and measured by hand in-house.

Quality "Made in Germany" for the highest demands.

Specifications

Power range max. 3400W (15 sec.)
Idle Current @ 8.4V 1.1A
Resistance (Ri) 0.02 Ohm
RPM/Volt (kv) 205 U/min-1
Weight 620g
Outer diameter 88.5mm
Length 65.5mm
Number of poles 28
Controller recommondation Master Senstrol 120A Opto

Typical setups

Prop Xoar CFK 21x13 Mejzlik 20x14EL 3Bl. Falcon 20x13,5 3Bl.
V / LiPo 37V = 10S LiPo 37V = 10S LiPo 37V = 10S LiPo
Amp. 92A 91A 90A
Power 3400W 3367W 3330W
RPM 6480 6000 6270
Controller Master Senstrol 120A Opto Master Senstrol 120A Opto Master Senstrol 120A Opto
Specifiactions
max. power range [W] (max.15 sec.) 3400
Poles 28
Turns 11
Idle current (I0) at 8.4V [A] 1,1
Internal resistance (Ri) [Ohm] 0,02
Recommended timing [°] durch ID-Chip vorgegeben
Switching Frequenzy [kHz] durch ID-Chip vorgegeben
Controller recommendation [A] (depending on setup) Master Senstrol 120
Idle speed per volt (kv) 205
Dimensions and weight
Weight [g] 620
Length [mm]/[in] 65,5
Outer diameter [mm]/[in] 88,5
Shaft diameter [mm]/[in] 8
Delivery contents
Prop Adapter Ja
Gold plug mm (soldered) 4
Backmount mountable Nein
Front mountable Ja
Additional Parts for this item:
other Options for this item:
Average customer rating: 
Number of Customer reviews: 1
Write an online review of this item and show it to other visitors!
Item reviews
Problemloser, leistungsstarker F3A Antrieb
Review from 05.10.2021|Purchase not verified
Der Q80 11S arbeitet völlig problemlos im F3A Modell. In Verbindung mit einer 20x14 Dreiblatt Luftschraube und dem Senstrol Regler steht ein Antrieb zur Verfügung der jederzeit Leistungsreserven hat und durch die gute Bremswirkung eine gleichmäßige Fluggeschwindigkeit ermöglicht. Dabei bleibt der Motor kühl und braucht recht wenig Strom.
0 of customers found this information helpful.
View all reviews
Customers who bought this product have also purchased the following items: