EWC6 system for 2 wing servos

EWC6 system for 2 wing servos

Product description and features

The EWC6 system is suitable for connecting two wing servos inside the model aircraft. Wiring requires a EWC6 wing plug and a EWC6 fuselage cable for each wing.

More product details

EWC6 wing plug | EWC6 fuselage cable | Advantages of EWC6 system

EWC6 wing plug

Screw the EWC6 wing plug into the root rib of the model aircraft's wing. Solder the connection cables of the wing servos on the six pins of the EWC6 wing plug's PCB.

Fix the connection cables of the wing servos on the PCB with the contained cable tie and the shrink tube.

See product overview

EWC6 fuselage cable

Lead the EWC6 fuselage cable to two vacant inputs of your receiver or dual power supply.

It is available in three different lengths with JR sockets or open end for custom cutting.

See product overview

Advantages of the EWC6 system

  • Reverse polarity protected
  • High current qualified (up to 12A per contact)
  • 100% safe connection because of locking
  • Small construction form due to 2.54mm contact spacing
  • Easy mounting due to packaging
  • Strong high flexible cable with 0.34mm² (AWG22) cross section

See product overview