Light control unit Light Driver 5.0
Product description and features
Light control unit for operating innoflyer headlights and light modules.
Up to five innoflyer headlights and/or light modules can be conneted to the light control's SLC output (Smart Light Channel) directly. There are no soldering work and no pre-resistors necessary.
Operating of third party light modules is also possible. For each SLC output a constant current can be selected if necessary.
The light control unit can be extended with two additional Light Driver 3.0 or Light Driver 5.0 light control units connected to the Slave outputs. So up to 15 innoflyer spotlights, innoflyer light modules as well as suitable thrird party lighting modules can be controlled. Furthermore the extension module SLC Expander allows the parallel operating of two spotlights or light modules at a single SLC output (Smart Light Channel).
Intelligent light control
- Plug & Play type recognition: The headlights and light modules will be recognized by the light controller Light Driver 5.0 automatically. The light controller regulates luminosity thus heat generation according to the thermal properties of the headlight's and light module's housings.
- MLT technology (Maximum Light Tracking): Optionally the headlights and light modules can be operated with highest liminous power. An integrated heat sensor enables the light controller Light Driver 5.0 to regulate the liminosity in case of strong heat generation automatically.
The light control unit can be connected to the USB connection of a PC or Laptop. With the LightCockpit software all SLC channels can be adjusted separately. Among others permanent light, different individual blink and flash sequences, delays as well as the brightness of the connected consumers can be selected.
1 light control unit Light Driver 5.0, 4 mounting arms 10mm inkl. srews and 1 quick reference guide.
|Technische Daten Beleuchtungselektronik|
|Eingangsspannung||5V ... 14V|
|Abmessungen||70mm x 51mm x 7mm (L x B x H)|