PowerSmoke 740 HV V2 Smoke pump
Product description and features
Smoke oil pump with integrated self-venting, passive cut-off valve. The cut-off valve and the exhaust valve of the pump are integrated into the pump head.
Due to use of that valve the pump is absolutely tight. Even at inconvenient installation position below the tank no oil will leak out. Exactly switching on and off the smoke is still possible.
Smoking after switching off or permanent smoke when pump is switched off will be avoided.
Improvements of Version 2
Much faster suction and no return after venting due to the new self-venting head valve. This increases the maximum possible flow rate by up to 20 percent. At 12 volts so a flow rate of up to 1 liter per minute can be achieved which is particularly interesting for jets.
1 PowerSmoke 740 HV V2 smoke pump, 2áretaining clamps, 1 patch cable, 1 programming jumper, 1áT-piece tube connector, 1áPU-3átube and 1 quick reference guide.
Note for use with a JETI Duplex system: The pulse frequency of the system should be set to 8 or 20 milliseconds. If the pulse frequency is set to "AUTO", malfunctions of the pump electronics are possible.