- Description
- Links
- Documents
Stream-Fan 100mm kv1070 ducted fan system
Product description and features
Powerful ducted fan drive suitable e. g. for sport and scale R/C models with 10S or 12S LiPo battery up to approx. 8 kilograms take-off weight.
Driven by our Hacker Motor E50-L 1,5 kv1070 inrunner motor, the GRP-reinforced 11-blade rotor achieves a high degree of efficiency and generates a pleasant turbine sound.
Complete system ready for installation
The electric motor and WeMoTec ducted fan are delivered ready for installation. The complete ducted fan system is precisely balanced, tuned and tested before delivery.
Measurement conditions
The Stream-Fan ducted fan system was measured with a stabilized voltage of 3.70 volts per cell. The information on current and thrust (see Product data tab) are based on the measurement with a small inlet lip (radius 6 millimeters) at an outside temperature of 21 degrees Celsius, 50 meters above sea level and standard air pressure. These values may vary depending on the battery, speed controller and installation situation.
Accessories
Suitable speed controllers, batteries, safety switches and an appropriate inlet lip* can be found in the Accessories tab.
Delivery contents
1 Stream-Fan 100mm kv1070 ducted fan system (consisting of a Hacker Motor E50-L 1,5 kv1070 inrunner and WeMoTec ducted fan) and 1 manual.
Specifications | |
Voltage [V] | 37 (10S) / 44.4 (12S) |
Load current at 10S [A] | 88 |
Load current at 12S [A] | 125 |
Power at 10S [W] | 3256 |
Power at 12S [W] | 5550 |
Idle speed per volt (kv) | 1070 |
Thrust at 10S [kg] | 5.1 |
Thrust at 12S [kg] | 6.9 |
Beam speed at 10S [m/s] | 79.96 |
Beam speed at 12S [m/s] | 93.52 |
Dimensions and weight | |
Weight [g] | 530 |
Total diameter [mm] | 103 |
Total length [mm] | 58 |
Motor diameter [mm] | 39 |
WeMoTec
Walzwerkstr. 24
47877 Willich
Germany
info@wemotec.com