- Description
Servo SAVÖX SV-0236MG+
Product description and features
The SV-0236MG+ is a powerful maxi size servo which is perfectly suited as a steering/throttle servo in 1:5 scale buggy/truggy. Of course, it can also be used in aeroplanes when an impact-resistant, robust servo is required, e.g. for the tow release or the landing gear.
The new + version of the well-known SV-0236MG+ servo differs slightly from its predecessor both visually and technically. The + version is characterised by a soft start which slowly moves the servo into the start position when switched on and the Sanwa SSR mode.
The technical data of the servo leaves nothing to be desired: 0.21/0.17 sec/60 degrees and 30/40 kg*cm at 6.0/7.4 volts
Control frequency up to 333Hz, centre pulse 1520us
Technical data
- Operating time S2/60° (sec): 0.17
- Operating time S1/60° (sec): 0.21
- Weight (g): 200
- Actuating force S1 (kg*cm): 30
- Width (mm): 30
- Voltage range: 4.8V-7.4V
- Actuating force S2 (kg*cm): 40
- Height (mm): 57.4
- Length (mm): 65.8
- Actuating frequency: Actuating frequency up to 333Hz, centre pulse 1520us
- Output teeth (number): 15
- Motor type: Brush motor
- Recommended applications: Helicopter, aeroplane, car, boat
- Ball bearing (number): 2
- Voltage 1 (Volt): 6,0
- Gear type: Metal
- Housing type: Part metal
- Voltage 2 (Volt): 7,4
- Classification: Large model servo
Scope of delivery
1x SAVÖX SV-0236MG+ servo, servo arms and accessories
| General | |
| Recommended application area | Hubschrauber, Flugzeug, Auto, Boot |
| Classification | Standard |
| Dimensions and weight | |
| Length | 65,8 |
| Width | 30 |
| Height | 57,4 |
| Weight | 200 |
| Specifications | |
| High voltage capable | ja |
| Voltage 1 (V1) | 6,0 |
| Voltage 2 (V2) | 7,4 |
| Max. input voltage | 7,4 |
| Regulating time V1/60° | 0,21 |
| Regulating time V2/60° | 0,17 |
| Pulling load V1 | 30 |
| Pulling load V2 | 40 |
| Frequency | 333 |
| Number of ball bearings | 2 |
| Outer diameter output in mm | 5,9 |
| Housing type | Partial metal |
| Motor type | Brush motor |
| Transmission type | Metal |
| Number of output cogs | 25 |
| Programmable | no |
| Soft start | yes |
| Telemetry | No |