MEZON EVO 85 OPTO
Product description and features
The MEZON EVO controllers are the successors to the previous product line of MEZON PRO controllers. The main advantages of this series are very effective cooling, full telemetry, speed control for
Heli operation and F3A mode. MEZON EVO controllers have an aluminum housing (except LMR types), which contributes to efficient cooling. The setup wizard helps the user to set up the controller
Set up intuitively and quickly using the JETI duplex transmitter. The MEZON EVO is an absolutely universal controller for airplane, helicopter, ship and vehicle models for users not only from JETI
Duplex transmitters, but also other RC systems.
Functions
- Full EX telemetry (voltage, current, capacity, revolutions, etc.)
- Setting up the controller via EX-bus communication from the JETI duplex transmitter via the device overview
- Precise controller and full support for helicopter models
- F3A mode for aerobatic models
- Adjustable brake with energy recovery into the battery
- Highest possible interference immunity due to optocouplers, separate power supply of the receiver required.
- large supply voltage range 2 - 12 Lixx (max. 51V)
- bidirectional motor running possible (forward/backward)
active proportional brake
- compact dimensions
- User-friendly setup wizard for quick and easy setup ("Quick Setup mode")
- an "Expert mode" with access to all setting options
- No heat sink, "LMR" means "Limited Motor Runtime" = for short motor runtimes, e.g. when sailing
- high efficiency
- Firmware upgrade possible
- wide range of adjustable parameters
Specifications
- Weight [g]: 83
- Dimensions [mm]: 28 x 20 x 85
- Sustained current [A]: 85
- Telemetry: Yes
- Operational temperature [°C]: -10 to 85
- Supply Voltage [V]: 6 to 51
- Batteries LiXX : 2 to 12
- Resistance in conducting state [mO]: 2 x 1.2
- Cable crossection (input/output) [mm²]: 4.0 / 2.5
- OPTO: Yes
- Housing: Aluminium
Scope of delivery
1x MEZON EVO 85 OPTO, 1x mounting kit, 1x manual