Servo SAVÖX SV-1271SG+

Servo SAVÖX SV-1271SG+

Product description and features

• New + version with soft start, Sanwa SSR mode
• Powerful and fast digital servo, robust steel gearbox with low backlash
• High-voltage digital servo 4,8-8,4V, operation with 2s LiPo
• Dimensions (L/W/H): 40.3 x 20.2 x 37.2 mm Weight: 63 grams
• 0.08/0.07 sec/60 degrees u. 30/35 kg*cm at 7.4/8.4 volts

The SV-1271TG+ is a powerful servo of the standard size which is very well suited for use in wing models. Of course, it can also be used in RC cars. The application as swashplate servo for scale helicopters up to the 700 class is another option.

The new + version of the well-known SV-1271TG+ servo differs minimally from its predecessor both optically and technically. A soft start which moves the servo slowly into the start position when switched on and the Sanwa SSR mode distinguish the + version.

The technical data of the servo leaves nothing to be desired: 0.08/0.07 sec/60 degrees and 30/35 kg*cm at 7.4/8.4 volts.

Drive frequency up to 333Hz, centre pulse 1520us

Like all HV servos from Savöx, the SV-1271TG+ can of course be operated with up to 8.4V!

Properties

Operating time S2/60° (sec): 0.07
Operating time S1/60° (sec): 0.08
Width (mm): 20,2
Actuating force S1 (kg*cm): 30
Actuating force S2 (kg*cm): 35
Height (mm): 37,2
Voltage range: 4.8V-8.4V
Length (mm): 40,3
Weight (g): 63
Drive frequency: Drive frequency up to 333Hz, centre pulse 1520us
High-voltage capability up to 8.4V: Yes
Recommended use: Helicopter, aeroplane, car, boat
Ball bearings (number): 2
Motor type: Bell-type armature motor
Housing type: Part metal
Output teeth (number): 25
Voltage 1 (volts): 7,4
Gear type: Steel
Voltage 2 (volts): 8,4
Classification: Standard