- Description
Servo SAVÖX SW-0231MG +
Product description and features
- New + version with soft start, Sanwa SSR mode
- Crazy digital servo, ideal for large models, robust low backlash steel gearbox
- High voltage brushless digital servo 4.8-8.4V;for large models, robust low backlash steel gearbox
- High voltage brushless digital servo 4.8-8.4V, runs on 2s LiPo
- Size (L/W/H): 40.3 x 20.2 x 38.7 mm Weight: 74 grams
- 0.12/0.11 sec/60 deg u. 40/45 kg*cm at 7,4 / 8,4 Volt
The SB-2270SG+ is a powerful brushless servo of the standard size which is very well suited for use in wing models. Of course it can also be used in RC cars. The application as swash plate servos for scale helicopters up to the 700 class is another option.
The new + version of the well-known SB-2270SG+ servo is visually and technically minimal from its predecessor. A soft start which leads the servo when switching on slowly in the start position and the Sanwa SSR mode distinguish the + version.
The technical data of the servo leave no wish unfulfilled: 0.12/0.11 sec/60 degrees and. 40/45 kg*cm at 7.4 / 8.4 volts
drive frequency up to 333Hz, center pulse 1520us
Like all HV servos from Savöx, the SB-2270SG+ can of course be operated with up to 8.4V!
Suggested Applications
Airplane servo, scale helicopters up to 700 class, RC-CAR
Features
- Position time S2/60° (sec): 0.11
- Positioning time S1/60° (sec): 0.12
- Width (mm): 20.2
- Height (mm): 38.7
- Voltage range: 4.8V-8.4V
- Positioning force S1 (kg*cm): 40
- Length (mm): 40.3
- Power S2 (kg*cm): 45
- Weight (g): 74
- Control frequency: Actuation frequency up to 333Hz, center pulse 1520us
- High voltage up to 8.4V: Yes
- Recommended use: helicopter, aircraft, car, boat
- Ball bearings (quantity): 2
- Gear type: part metal
- Drive teeth (quantity): 25
- Voltage 1 (volts): 7.4
- Motor type: Bürstenless motor
- Gear type: steel
- Voltage 2 (volts): 8.4
- Classification: standard .
Scope of delivery
1x Servo SAVÖX SW-0231MG +, Servo arm and mounting hardware.